Meiyuan T-BF3001FR Black Lacquer Aluminum Foil Tape is a 30u nominal dead soft aluminum foil coated with Black lacquer on its surface, the other side coated with aggressive flame-retardant acrylic adhesive and protected by easy release liner.
¨ Excellent Peel Adhesion ¨ Good Initial Tack & Permanent Bonding
¨ UL 723 Fire Rating Approval ¨ Outstanding Temperature & Aging Resistance
¨ Black appearance, anti-glare
Super performance, UL 723 FR grade 30u foil tape. Ideal for sealing joints / seams against moisture and vapor on foil jacketing insulation. Suitable for many other permanent sealing, holding, splicing or masking applications requiring the protection offered by a foil backing.
Technical Data Sheet
Cut Roll: 48mm, 50mm (2"), 60mm, 63mm (2.5"), 72mm, 75mm (3"), 96mm, 100mm (4").
Jumbo Roll: 1200mm x 1350M, 1200mm x 1200M.
The data above are typical results and subject to change without notice.
Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
The product should be stored at room temperature and kept from wet and heat source.
Shelf life: One year from shipment date when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
The user should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user's special purpose and technique.
Cut roll: Printed core and shrink wrapping
Log roll: Cardboard wrapping
Jumbo roll: Plastic film + corrugated board wrapping
Cut roll: Carton
Log roll: Carton + pallet / ply-wooden case
Jumbo roll: Ply-wooden case